top of page
DLC 2 flute down cut cutter endmill

TurboCut PRO 2 Flute Down cut

PriceFrom $16.00
GST Included
 
All of our TurboCut endmills are sent via Australia post express for speedy replacement
 
These 2 flute Down cut endmills are designed to force swarf downward into your cut leaving for a very clean top finish. Opposite to a spiral up cut, a down cut will give you a perfect top finish but a burred bottom finish. These endmills will produce some excellent engravings but due to the nature of the design they are not recommended for cutting all the waythrough materials as they will leave a rough bottom finish. 

Our PRO endmill range are made using high grade tungsten carbide coated a specialized DLC (diamond like coating) designed to out last and out perform conventional uncoated carbide cutters. The coating is designed to reduce wear and tear and dissipate heat leaving your jobs with a crisp clean finish. 
 
These endmills are rated for full commercial and industrial use on a regular basis.
 
Recommended for
  • Wood (All types and hardnesses)
 
Please Note
These endmills produce a lot of fine dust and a good extraction system and dust shoe is recommended when using these endmills.
 
Please be aware that the 8mm variants of these endmills will not fit in an ER11 collet such as those that are standard with a CNC3D QueenBee or QB2 machine. The maximum size cutting bit that will fit in your ER11 collet is 7mm.

  • What is DLC coating?

     

    Diamond-Like Carbon (DLC) coating is a nano-composite coating that has unique properties of natural diamond such as low friction, high hardness, and high corrosion resistance. These special characteristics make DLC coated tools highly suitable for machining materials that could be difficult to machine with uncoated end mills.

     

    Here are a few key things to know about DLC end mills:

     

    Longer Tool Life

    The DLC coating significantly improves the endurance of the cutting tool, allowing it to withstand high-speed machining for extended periods. The tool life of a DLC-coated end mill can be several times that of an uncoated tool, depending on the application.

    Reduced Friction

    DLC coatings exhibit a very low coefficient of friction, which reduces heat generation during cutting. This in turn helps to prolong tool life and improve surface finishes.

    High Speed Machining

    Because of their heat resistance and durability, DLC-coated end mills are often used in high-speed machining applications.

    Non-Ferrous Materials

    DLC-coated end mills are particularly effective when machining non-ferrous materials such as aluminum or copper alloys, graphite, composites, and certain types of plastics. They are not typically used for steel or other ferrous materials because the high temperatures generated can degrade the coating.

    Improved Surface Finish

    Due to their hardness and low friction, DLC-coated end mills can provide better surface finishes, which is beneficial in applications where aesthetic appearance or precise tolerances are important.

  • Specifications

    Endmill Size Total Overall Length
    2x17x3.175mm 39mm
    3.175x22x3.175mm 50mm
    4x25x4mm 50mm
    6x32x6mm 75mm
    8x42x8mm 100mm

     

    ** These are approximate overall lengths. This information should only be used as a guide. We recommend measuring the bit after you receive it for exact measurements **

No Reviews YetShare your thoughts. Be the first to leave a review.
bottom of page