QB2 V2 CNC router 1500x1500mm (Fully assembled) 7-8 wk Lead Time*

 
SHIPPING
If you are on Australia's mainland, a flat shipping rate will be charged if ordering directly from our website. 
 
If shipping to your location is greatly higher than this rate, Your order may be cancelled. We will contact you prior to this to discuss your options.
 
If you are on Australia's mainland and would like a more accurate shipping quote for one of our fully built machines OR if you are located in Tasmania or outside of Australia please fill in your details HERE
 
When receiving your machine make sure to uncrate it, even if you are still building your table. This will prevent moisture from condensing in the crate which can lead to rust buildup on any exposed steel, including rails and ball screws! See "How We Ship" for more info!
 
The current lead time for a QB2 CNC is roughly 7-8 Weeks!
 
 
Meet the QB2, the final evolution of our Australian made QueenBee CNC.
 
We have listened to and observed the feedback of the CNC community and we believe the QB2 design is the most overly engineered and well priced CNC machines in the serious hobby to light commercial CNC machine category.
 
The QB2 has had some serious upgrades over its predecessor with high precision ballscrews on all axes and the Z axis linear rails now use larger HGR15 profile rails on the Z axis to provide superior results on a variety of materials. 
 
Classified a heavy duty hobby machine, it's built for serious home hobby CNC operators who want to beautifully shear through alloys like brass and aluminium up to 50mm thickness with ease.
 
The QB2 was designed to make light work of materials such as:
 
Timbers (All)
Plastics (All)
Foams (If machinable)
Alloys (Aluminium and brass)
Composite panels
 
 
 
Each QB2 machine includes: 
 
Nighthawk CNC controller
Easy probing mount Limit switches
Endmills to get started (with spindle option)
All wiring and cabling
A fitted MDF spoilboard
 
Choose between a 3 axis or 4 axis machine:
 
You have the option of choosing between a 3 axis or 4 axis machine. Our Nighthawk controller that comes with your QB2 supports up to 4 independent axes.
 
A 3 axis machine will allow you to work on one side of a job at a time, whereas a 4 axis machine will allow you to work on all sides of your job except the very ends.
 
Example: You are cutting out a detailed table leg. You want to machine both sides of the leg. A 3 axis machine will need you to machine one side, then flip it over and do the other side. 
 
If you had a 4 axis machine the timber will turn itself over precisely so you can do the other side in the one job.
 
Please Note: There are a lot of simpler CAM programs out there that support 3 axis job creation like Easel. Most do not support 4 axis machining. You may need to consider learning a more detailed CAM software package such as Vectric or Fusion360 for 4 axis jobs.
 
You can still use only 3 axes to start with and simply add your 4th axis on later when you are ready to advance. 
 
Choosing the 1.5kw Spindle option:
 
The 1.5kw air-cooled spindle is well matched to the design and performance of the QB2. The spindle itself has a 65mm diameter and supports ER11 collets allowing a maximum shank size of up to 1/4" (6.35mm). It features 3 ball bearings and is designed to work for extended periods of time provided that it is run at 16,000 RPM or more.
 
We supply a genuine IP66 rated 1.5kw Invertek VFD to drive your spindle. All our VFDs on fully assembled QB2's are fully C-tick approved and fully electrically fitted and complied for use in domestic and commercial environments.
 
IMPORTANT NOTE: 
Fully assembled QB2 machines come with an 1.5kw IP66 Invertek VFD.
 
 
Choosing our Quick-access magnetic dust shoe option:
 
Keeping your machine and workshop clean and tidy is something not to be overlooked.
 
Made from durable plastic, our quick-access magnetic dust shoes make keeping your machine clean and tidy, setting your zero, changing endmills and observing your job a Snap!
 
Simply dettach and reattach the magnetic front cover, attach your vacuum hose and away you go.
 
Choosing a Probe: 
 
We offer 2 types of probes; A Z axis only probe and an XYZ probe. Using a probe is a great way to find the edges and top of your jobs very accurately and easily. Our CNC3D Commander software has an easy probing wizard that makes probing very easy for both the Z only probe and the XYZ probe.
 
For those who simply want to set their job zero on the surface on a piece of material the Z probe is a great option. For those who want to find the actual corner of a piece of stock the XYZ probe is the perfect tool for precisely positioning the cutting tool directly over the corner.
 
Every QB2 CNC comes with a quick connect probe port right on your Z axis.
 
Should I choose the 15w laser option?
 
A laser is a great way of putting finishing touches on a timber or leather project and can produce beautiful grayscale engravings or branding on your products. Please note: We do not guarantee that our lasers will cut anything but some of our customers have surprised us with just how capable even our 15w lasers really are!
 
 
Please Note: T-tracks are NOT included with your machine. They are available for separate purchase if required. They can be found HERE. You can also add some clamps HERE
 
*Lead times are approximate and can change without notice, based on build volume & stock availability. Lead times do NOT include shipping transit time*
 
 
**scroll down for more info & payment options**
 
 
 
You must select 1 option in each drop down to update the price