Hi I come from Trundle NSW near Parkes in the Central West
My brother brought a Huawei Starfire HNC-1500W-J3 CNC Cutting Machine with a SF-HC25C3 Torch Height Controller 2nd hand
He is using a Unimig Razor cut
The guy he brought it off had wired it up wrong so it had burnt out a couple of wires which my brother fixed.
The software it is using is fastCAM V7 which I purchased another copy so I could put it onto a Laptop. I also purchased Outline so I can convert clipart to a dxf file.
When we put the file into the machine and start it up it does a demo run but will not fire up the PLASMA CUTTER at the end of it.
Does anyone know what the settings are on this model Huawei Starfire HNC-1500W-J3 CNC Cutting Machine.
Does anyone know the settings on this SF-HC25C3 Torch Height Controller, 1 of the dials on it says Given Voltage, it is sitting on 130, should this be on 240 Volts as its in Australia.
It is very frustrating as we know we are doing something wrong but cannot work it out.
I have looked at manuals and videos but cannot work it out as they do not have any settings in them
Does anyone know of any forums or manuals for this model Plasma cutter
Is there anyone in the Central West of NSW with a similar machine from Parkes, Dubbo, Orange or Bathurst who would be willing come to Parkes where the machine is and troubleshoot this problem. We would fix you up for fuel.
Thanks for your help
Mick O'Bryan