CNC Laser engraver 65X50cm Work area

 
This "maker" inspired CNC laser engraver is quite an impressive machine for the price.
 
We have specifically chosen a 65x50cm working area to be a comfortable balance between job versatility and overall size of the machine making it easy to leave on a desk or pack away for easy storage when not in use.
 
The kit includes everything you need to get it going and can be assembled with basic hand tools in less than half a day. The instructions are clear and simple to follow.
 
So, what are you waiting for? Make something!
 
 
Choosing the 15w Laser Option:
 
The 15w laser solid-state laser design is the perfect gift for that creative person who has *almost* everything else.
 
The 15w laser are capable of cutting some thin materials BUT we recommend the use of the laser for engraving only, as we cannot guarantee the laser will safely and cleanly cut the material. 
 
We have worked with our suppliers to deliver a high quality laser diode that can run at 80% duty cycle constantly for a full 60 minutes (or greater) of operation.
 
This 15w 445nm Blue laser module can do some incredible engraving on the following material:
Leather
Timber
Most Plastics
Bamboo
Paper
Cardboard
 
 
Choosing the 30w Air Assist Laser Option:
 
The 30w 450nm blue laser that has an air assist system designed for clean and crisp cutting on timbers and some acrylics and also includes an easy magnetic laser safe cover for engraving as well.
 
The laser itself consumes 30w of power at 24V and the design consists of 2 x 8w 450nm laser diodes running at 100% duty cycle that have their beams converged into 1 powerful laser beam.
 
Included with the 30w Air Assist Laser:
30w 450nm Blue laser
Air assist nozzle attachment
Red plastic magnetic engraving attachment
Wiring breakout loom for laser (~100mm length)
Air assist Hose
24V Air pump
24v 160w Meanwell Power Supply
 
Choosing A Controller Option:
 
The controller is the brain of your laser engraver and is how you interact with the machine to bring your ideas to life.
 
The Standard GRBL Controller is a low-cost option which has basic control functionality. It does not offer the protections and control options included with our Nighthawk SCRIBE.
 
XYZ Motion Control
USB Control Only
No On-board Memory
Non-replaceable Stepper Drivers
12V Input
 
The Nighthawk SCRIBE is the smallest in our Nighthawk family of CNC controllers and has all of the functionality you would want with this laser engraver.
 
XYZ Motion Control
USB/WiFi/Bluetooth Connection
On-Board MicroSD Memory
"StepStick" DRV8825 Stepper Drivers
Limit Switch Connections
24V Input
 
You can find more information on the Nighthawk SCRIBE Here
 
***PLEASE NOTE!*** 
The Instructions reference an extra offline controller attachment, this is an optional extra that is NOT supplied with the engraver kit. We have tested the performance of the optional offline controller and they do not meet our quality standards.
*********************** 
 
Please Note: High powered lasers like ones in this kit are extremely dangerous. We recommend using these lasers in a laser filtered enclosure or with the use of Laser goggles like the ones located on our techstore HERE
 
We cannot be held responsible for any misuse of any of our laser products. Please ensure you have appropriate PPE when using any laser.
 
 
 
You must select 1 option in each drop down to update the price