top of page
AXBB-E CNC Controller + Licence Combo

    • AXBB-E CNC Controller + Licence Combo

    $439.00Price
    GST Included
     
    The AXBB-E is a CNC Motion Controller and breakout board combination with Ethernet interface. The device can communicate with a connection to the control computer’s network card.
     
    The connection can be built with direct connection or via router/switch devices in a local area network (LAN). This makes it an excellent pairing with the UCCNC motion control software.
     
    The device can be used to control machine tools with stepper or servo motor controls with step and direction interfaces.
     
    There are 8 isolated outputs to drive relays, solid state relays, laser controller or anything else which require isolation. There are 6 isolated inputs to input signals of sensors, switches and push-buttons. There is one safety charge pump circuit with isolated output.
     
    The controller can output a maximum of 400kHz stepping frequency and can work with up to 6-axes, however only 8 dedicated step and direction signal pins for 4 axes are wired out on the board, but the I/Os on the software side are freely configurable to any pins making it possible to use all 6 axes if required. In addition to the breakout signals there is one IDC26 port on the board which has standard LPT port pinout.
     
    An IDC26 to DSUB25 cable (not included) can be used to connect an additional standard LPT port compatible breakout board to the device to extend the number of I/Os if required. The board also has 2 analog input channels which can work with externally connected potentiometers (not included).
     
    The recommended potentiometer full scale resistance is 1k to 10k Ohms. The analog input channels can be used to control the feed rate override and the spindle speed override in the software. There is also one 0-5V or 0-10V (jumper selectable) analog output channel. The analog signal can be used for example to control the speed of a spindle motor with a variable frequency drive (VFD).
     
    The breakout board functionality is done with the on-board high speed optocouplers, transistors and buffer ICs.
     
    • Complete motion controller and breakout board solution in a single board.
    • Capable of Stepper or Servo control of up to 6-axes
    • There are 8 non-isolated outputs to be used as step and direction signals
    • 8 optically isolated high speed N-channel power mosfet transistor outputs.(NPN)
    • 9 non-isolated buffered TTL outputs to control step/dir signals, laser driver etc.
    • Isolated charge pump output with power N-channel mosfet transistor.
    • 6 high speed optoisolator inputs.
    • 1 IDC26 non-isolated extension port with standard LPT port pinout (12 outputs and 5 inputs).
    • LED indicators on isolated I/Os.
    • Isolated I/Os are 24Volts capable.
    • The AXBB can output a maximum of 400kHz stepping frequency
    • There are 2 analogue input channel
    • There is also one 0-5V or 0-10V (jumper selectable) analog output channel
     
    Only 8 left in stock
    SKU: AXBBEUC

    • Technical Support / Documentation

      Product Manual

      Product manual for the AXBB-E can be downloaded HERE

       

      UCCNC Software License

      UCCNC is a machine control software. It uses and external hardware to generate signals to produce coordinated motion on up to 6 machine axis. The external hardware is a motion controller device which is currently our UC100 or UC300 or UC400ETH or AXBB motion controller. The License purchases is linked to our range of CNC Drive Motion Controllers listed. One licence per controller of which are none transferable.

      This software connects to the external motion controller via a single USB port connection or Ethernet connection (depends on the motion controller model) of a personal computer (PC) and via a software application interface (API) which is built into the software. The installer of the UCCNC software includes and completes all the tasks to make it possible to use this software on your computer. The device drivers are included in the installer too.

       

      Key features:

      – Supports the UC100, UC300, UC300ETH and UC400ETH motion controllers
      – Controls machines upto 6-axis
      – RS274 G and M codes execution
      – Unlimited number of user text macros with flexible script engine
      – Upto 400kHz operation. (selectable 25kHz, 50kHz, 100kHz, 200kHz, 400kHz with 20us, 10us, 5us, 2.5us and 1.25us pulse widths.) Note: Maximum step frequency depends on the motion controller device used
      – Exact stop and cont.velocity interpolations with highly configurable advanced look ahead function
      – G54..G59 work offsets and G52/G92 temporary offset
      – 3D toolpath viewer
      – OpenGL screen optimised for fast screen update rates with low CPU/GPU usage
      – Built in visual screen editor
      – 48 configurable hotkeys
      – 48 configurable inputs trigger to assign physical input pins to UCCNC function calls
      – 48 configurable outputs trigger to assign virtual LEDs to physical output pins
      – Parametric programming using internal variables and programming mathematical expressions
      – Controls THC control for plasma cutters. (M205 and M206 macros)
      – Screensets for mills and plasma cutters
      – Modbus TCP, RTU and ASCII communication support via Modbus plugin
      – M10/M11 macros for fast syncronous outputs for laser cutting applications
      – G33 and G76 syncronous thread cutting with free running spindle and encoder feedback to the motion controller
      – G33.1 and G33.2 rigid tapping with Z-axis syncronised to spindle motor
      – Supports wired MPGs and the UCR200 wireless via plugin
      – Built in basic CAM module with DXF files import
      – Stopless smooth backlash compensation with adjustable backlash acceleration
      – Plugin interface with Visual C# example plugin template. Plugin works with C#, VB, C++ programming languages
      – Fast laser scan type engraving plugin, webcamera plugin, Xbox360 controller plugin, 3D printer plugin etc.
      – Fast communication with optimised buffering technic producing low button press to event execution time
      – Extremely low jitter on the step and direction signals for smooth, high speed and precise motors operation
      – Runs in demo (simulation mode) without a software license key
      – Compatible OP systems: Windows XP, 7, 8, 8.1,10 on all both 32 and 64bit versions

       

      The manual for UCCNC can be downloaded HERE

    No Reviews YetShare your thoughts. Be the first to leave a review.
    bottom of page