45mm Indexable surfacing cutter / planer

 
All of our TurboCut endmills are sent via Australia post express for speedy replacement
 
These 45mm cutting diameter, 2 Flute, 4 blade indexable surfacing cutters / router bits are excellent for surfacing slabs of timber for a smooth finish. It features 4 x high grade YG6X carbide replacable cutting inserts that have 4 matched sides meaning that as the teeth eventually dull over time, they can simply be rotated to a new side minimizing the need for replacing the teeth. 
 
These cutters are engineered for daily commercial and industrial use.
 
Recommended for
 
Wood & timber (MDF, ply, hardwoods)
Timber composites
 
Specifications
Shank diameter: 12mm
Cutting diameter: 45mm
Carbide inserts: 12*12*2.2mm. 
Grade of carbide inserts：YG6X
Countersunk screw : M4*7 
 
Please Note
 
Due to the size of these bits, ensure they are mounted as high as possible into the router/spindle to reduce any run-out and possible breakages.
 
It is highly recommend to ramp your plunges with these cutters but if you absolutely must plunge straight downward, reduce plunge rate to 100mm/m or less to avoid chatter!
 
Be careful when cutting or engraving MDF and some particle timber products as they produce a lot of fine dust that can irritate the throat, eyes and lungs. It is recommended to use a dust shoe and suitable dust extraction system when machining these products.
 
Please be aware that these cutter have a 12mm shank and will NOT fit in an ER11 collet such as those that are standard with a CNC3D QueenBee or QB2 machine. The maximum size shank that will fit in your ER11 collet is 7mm.